0 Hits

The principle of sublimation Offset Heat Transfer ink balance is minimizing the amount of wetting liquid

in advance of layout is not dirty. Many dynamic variables in the printing process changes

are easily lead to ink balance broken. The offset printing machine operator needs to

actively check, prevent scrumming. Layout priority detection should be the most easily

strumming parts:
    a. Small white text and lines turn to be dirty easily, especially when the plate no

level. b. The darkened part of the level version is easy to paste off. c. The plate edges

are more easily dirty due to their position.
    What is said above is mainly aimed at some problems that should be paid attention to

the assessment of vision. The qualified factory should check together with control strips

and instrument checks to achieve the best effect. The control strip has the function of

amplifying for this imperceptible printing fault visually, but placing the control strip

must use larger paper, which increases the production cost. The density and chromaticity

detection is not affected by the environment and subjective factors, and the results are

more objective in terms of value, which is an indispensable standard production tool. The

measurement sensitivity of dark parts by density meter is superior to the visual assessment

of ink of the deep parts of the light. Therefore, when printing light color field, it is

mainly based on the visual evaluation. While printing a dark color field, try to use a

density meter to detect auxiliary.
    Flock is a unique heat transfer vinyl that gives your design an added dimension given a

raised, soft, and textured suede/velvet feel that is a perfect alternative to embroidery.

This makes it great for children's garments (ex. onesies) as well as adults (ex. team

    Whether you’re looking for that alternative to embroidery or going for a retro look,

flock can help you achieve this. Siser StripFlock, as well as Chemical UpperFlock, can even

be layered on top of itself! With a wide offering of colors, you’re sure to find the

perfect shade to complement any design for children or adults.
    Flock Heat Transfer is

a non-permanent flocked paper for producing single colour flock transfers. Transflock is

distinguished by a constant and dense flocking and a uniform length of flock fibers.

Designs can be transferred without leaving any unwanted flock fibers on the textile.
    Sublimation Transfer

For Clothes
is an indirect printing process. Using sublimation ink-jet inks the image

is printed on a special transfer paper and, with heat, the image is transferred to the

fabric. The term sublimation describes the direct transition from a solid to a gaseous

state – this happens without the usual in-between liquid state. When heat is used for this

process, one refers to thermosublimation. This is a process that has been being used for a

long time in the textile industry. The actual process starts with the printing of a

preferably cheap, special paper. Until recently this was done using traditional gravure

printing – simple transfer papers printed with standard printing patterns and graphical

    Reflective Heat

Printing is the process of combining heat with a transfer medium to create

personalized T Shirts or merchandise. Transfer medium comes in the form of vinyl (a

coloured rubber material) and transfers paper (a wax and pigment coated paper). Heat

transfer vinyl comes in various colors and patterns, from solid colors to even reflective

materials and glitter materials. It is most commonly used to customize names and numbers on

jerseys. Transfer paper has no limiations to colors and designs. Individual artwork or

images can be printed onto the medium with an inkjet printer to create shirts with your

design! To finish off, vinyl or transfer papers are in a cutter or plotter machine to cut

the design’s shape and transferred onto a T-Shirt using a heat press machine.
    Advantages of

Sublimation Heat Transfer
    – Allows for different customization for every piece e.g. name customization
    – Shorter lead time for smaller quantity orders
    – Cost-efficient for small quantity orders
    – Able to produce high quality and complex graphics with unlimited options
    Heat Transfer

Printing For Leather
was introduced by John Sadler and Guy Greenway back in the

1750s. The technique was first developed to decorate ceramics, mainly pottery. The

technique was well accepted and it quickly spread to other parts of Europe.
    Back then, the process involved a metal plate engraved with decorative elements. The

plate would be covered in ink and pressed or rolled over the ceramic. The process was slow

and tedious compared to modern-day transfer printing, but it was still way quicker than

hand painting on ceramic. Later in the late 1940s, thermal transfer printing (a technique

more commonly used today) was invented by a corporation called SATO, based in the US.


Sorry, comments are unavailable..